|
Not sure which Controllers are right for you?
Download the  Controller selector chart
|
|
|
Controllers
Temperature should be the first
priority when considering how the
area will be setup. Some people have turned to
expensive cooling methods such as air-conditioners. A simpler (and cheaper) temperature control method is to use ventilation fans to remove the hot, humid air and bring dryer, cooler air into the growing area. To control the fan, a thermostat is used. The thermostat will turn the fan ON and OFF as required.
The UTC-1 controller works the same way...only better. Want to also control Humidity and CO2...try the EVC-1 or EVC-2 or just a simple, inexpensive temperature control device like the COOL-1
UTC-1 Universal Temperature Controller
-
Different Day and Night temperatures settings
- Records the minimum and maximum temperature readings
-
Has 2 receptacles that can control up to 15 amps of power
-
Can control heating or cooling devices
- Adjustable "Hysteresis" or "dead band" allows the user to customizethe unit
|
EVC-1 Environmental Control (Analog)
|
-
Reliable and simple to use
-
Temperature and humidity modes allows the user to control them together or separately
-
Can be set to increase or decrease humidity to a specified level
-
Built in photocell activates CO2 device during the day
-
Night device outlet can control an exhaust fan / sulfur burner, etc.
-
Most cost effective analog controller on the market
|
EVC-2 Environmental Control (Digital)
|
-
Combines digital temperature
& humidity controls together in
one flexible unit
-
Two additional features
which activate a Night Device
and a CO2 device.
-
Controls your Temperature &
Humidity separate or together with DIGITAL accuracy.
-
Photocell allows day / night temperature & humidity settings and also provides daytime CO2 operation.
-
Remote combination temperature and humidity sensor probe with 15 foot cable
-
Easy to use with each function clearly identified by a pushbutton and a large LC display
-
Record & recall minimum and maximum temperature & humidity levels.
-
Two temperature modes, Heating & Cooling.
-
Separate humidity control to add or remove humidity.
-
Adjustable temperature dead band.
Remote Temperature and humidity sensor has a 15 foot cable to allow for measuring at plant level
Cool-1 Cooling Thermostat
-
Simple to use, set the temperature anywhere between 51` F to 115` F, the device turns on and off when the temperature changes.
-
Remote bulb thermostat can be placed 30 " from the unit
-
Big easy to read knob for setting temperature
-
Any cooling device operating on 120 volts, 15 amps or less can be plugged in to the COOL-1
-
Plugs directly into wall socket, red indicator lights when there is power
-
Can be configured for use as a "heating" thermostat or high temperature shutdown
|
|
|
|
|
